38 PIN CONNECTOR WALL PLATE ASSEMBLY FOR RAULAND R5 NURSE CALL SYSTEM
Replaces Rauland-Borg Corporation NCBED538 PIN CONNECTOR WALL PLATE ASSEMBLY FOR RAULAND R5 NURSE CALL SYSTEM
Assembly, Wall Plate Type, 2.75in Width, 4.5in Height, 2.5in Depth, Stainless Steel, Three 5in Cables Pre-Terminated With Plug-On Connector Termination Type, 38 Pin Connector Number of Pins, For Rauland R5 Nurse Call System
The NCBED5 Feature Bed Receptacle is a 37-pin recep-tacle that interfaces the feature bed with side rails to theResponder 5 nurse call system. The receptacle is mountedon a single gang stainless steel plate. The feature bedconnects to the receptacle via a bed cable (Rauland modelnumber NCC37 or NCC37RA). The receptacle is thenwired to the Responder 5 Feature Bed Control Module(Rauland model number 350302) via three (3) pre-termi-nated 8-pin connectors for easy installation. The FeatureBed Control Module is then wired via a single CAT5/CAT6cable to the Responder 5 patient stations to allow for callsfrom the bed side rails to be annunciated on the nurse callsystem and auxiliary functions such as TV control to becontrolled from the bed side rails. A 37-pin dummy plug isincluded with the NCBED5 Feature Bed Receptacle. The NCBED5 Feature Bed Receptacle typically mounts in asingle gang US back box at least 2 1/8” deep, which allowsenough room for the Responder 5 Feature Bed ControlModule to fit behind the Feature Bed Receptacle in thesame back box.
- Interfaces Feature Bed Side Rail Controls withResponder 5
- Simple, easy plug-on connectors to the Responder 5Feature Bed Control Module
- Provides dedicated Bed Port for Professional Installationof Feature Beds
- Stainless Steel Wallplate
- Dummy Plug for use when Bed is not plugged into theReceptacle
- Mounting: Mounts in a single gang backbox at least 2 1/8"dee
The NCBED5 Feature Bed Receptacle is a 37-pin recep-tacle that interfaces the feature bed with side rails to theResponder 5 nurse call system. The receptacle is mountedon a single gang stainless steel plate. The feature bedconnects to the receptacle via a bed cable (Rauland modelnumber NCC37 or NCC37RA). The receptacle is thenwired to the Responder 5 Feature Bed Control Module(Rauland model number 350302) via three (3) pre-termi-nated 8-pin connectors for easy installation. The FeatureBed Control Module is then wired via a single CAT5/CAT6cable to the Responder 5 patient stations to allow for callsfrom the bed side rails to be annunciated on the nurse callsystem and auxiliary functions such as TV control to becontrolled from the bed side rails. A 37-pin dummy plug isincluded with the NCBED5 Feature Bed Receptacle. The NCBED5 Feature Bed Receptacle typically mounts in asingle gang US back box at least 2 1/8” deep, which allowsenough room for the Responder 5 Feature Bed ControlModule to fit behind the Feature Bed Receptacle in thesame back box.
- Interfaces Feature Bed Side Rail Controls withResponder 5
- Simple, easy plug-on connectors to the Responder 5Feature Bed Control Module
- Provides dedicated Bed Port for Professional Installationof Feature Beds
- Stainless Steel Wallplate
- Dummy Plug for use when Bed is not plugged into theReceptacle
- Mounting: Mounts in a single gang backbox at least 2 1/8"dee
The NCBED5 Feature Bed Receptacle is a 37-pin recep-tacle that interfaces the feature bed with side rails to theResponder 5 nurse call system. The receptacle is mountedon a single gang stainless steel plate. The feature bedconnects to the receptacle via a bed cable (Rauland modelnumber NCC37 or NCC37RA). The receptacle is thenwired to the Responder 5 Feature Bed Control Module(Rauland model number 350302) via three (3) pre-termi-nated 8-pin connectors for easy installation. The FeatureBed Control Module is then wired via a single CAT5/CAT6cable to the Responder 5 patient stations to allow for callsfrom the bed side rails to be annunciated on the nurse callsystem and auxiliary functions such as TV control to becontrolled from the bed side rails. A 37-pin dummy plug isincluded with the NCBED5 Feature Bed Receptacle. The NCBED5 Feature Bed Receptacle typically mounts in asingle gang US back box at least 2 1/8” deep, which allowsenough room for the Responder 5 Feature Bed ControlModule to fit behind the Feature Bed Receptacle in thesame back box.
- Interfaces Feature Bed Side Rail Controls withResponder 5
- Simple, easy plug-on connectors to the Responder 5Feature Bed Control Module
- Provides dedicated Bed Port for Professional Installationof Feature Beds
- Stainless Steel Wallplate
- Dummy Plug for use when Bed is not plugged into theReceptacle
- Mounting: Mounts in a single gang backbox at least 2 1/8"dee
The NCBED5 Feature Bed Receptacle is a 37-pin recep-tacle that interfaces the feature bed with side rails to theResponder 5 nurse call system. The receptacle is mountedon a single gang stainless steel plate. The feature bedconnects to the receptacle via a bed cable (Rauland modelnumber NCC37 or NCC37RA). The receptacle is thenwired to the Responder 5 Feature Bed Control Module(Rauland model number 350302) via three (3) pre-termi-nated 8-pin connectors for easy installation. The FeatureBed Control Module is then wired via a single CAT5/CAT6cable to the Responder 5 patient stations to allow for callsfrom the bed side rails to be annunciated on the nurse callsystem and auxiliary functions such as TV control to becontrolled from the bed side rails. A 37-pin dummy plug isincluded with the NCBED5 Feature Bed Receptacle. The NCBED5 Feature Bed Receptacle typically mounts in asingle gang US back box at least 2 1/8” deep, which allowsenough room for the Responder 5 Feature Bed ControlModule to fit behind the Feature Bed Receptacle in thesame back box.
- Interfaces Feature Bed Side Rail Controls withResponder 5
- Simple, easy plug-on connectors to the Responder 5Feature Bed Control Module
- Provides dedicated Bed Port for Professional Installationof Feature Beds
- Stainless Steel Wallplate
- Dummy Plug for use when Bed is not plugged into theReceptacle
- Mounting: Mounts in a single gang backbox at least 2 1/8"dee
The NCBED5 Feature Bed Receptacle is a 37-pin recep-tacle that interfaces the feature bed with side rails to theResponder 5 nurse call system. The receptacle is mountedon a single gang stainless steel plate. The feature bedconnects to the receptacle via a bed cable (Rauland modelnumber NCC37 or NCC37RA). The receptacle is thenwired to the Responder 5 Feature Bed Control Module(Rauland model number 350302) via three (3) pre-termi-nated 8-pin connectors for easy installation. The FeatureBed Control Module is then wired via a single CAT5/CAT6cable to the Responder 5 patient stations to allow for callsfrom the bed side rails to be annunciated on the nurse callsystem and auxiliary functions such as TV control to becontrolled from the bed side rails. A 37-pin dummy plug isincluded with the NCBED5 Feature Bed Receptacle. The NCBED5 Feature Bed Receptacle typically mounts in asingle gang US back box at least 2 1/8” deep, which allowsenough room for the Responder 5 Feature Bed ControlModule to fit behind the Feature Bed Receptacle in thesame back box.
- Interfaces Feature Bed Side Rail Controls withResponder 5
- Simple, easy plug-on connectors to the Responder 5Feature Bed Control Module
- Provides dedicated Bed Port for Professional Installationof Feature Beds
- Stainless Steel Wallplate
- Dummy Plug for use when Bed is not plugged into theReceptacle
- Mounting: Mounts in a single gang backbox at least 2 1/8"dee
The NCBED5 Feature Bed Receptacle is a 37-pin recep-tacle that interfaces the feature bed with side rails to theResponder 5 nurse call system. The receptacle is mountedon a single gang stainless steel plate. The feature bedconnects to the receptacle via a bed cable (Rauland modelnumber NCC37 or NCC37RA). The receptacle is thenwired to the Responder 5 Feature Bed Control Module(Rauland model number 350302) via three (3) pre-termi-nated 8-pin connectors for easy installation. The FeatureBed Control Module is then wired via a single CAT5/CAT6cable to the Responder 5 patient stations to allow for callsfrom the bed side rails to be annunciated on the nurse callsystem and auxiliary functions such as TV control to becontrolled from the bed side rails. A 37-pin dummy plug isincluded with the NCBED5 Feature Bed Receptacle. The NCBED5 Feature Bed Receptacle typically mounts in asingle gang US back box at least 2 1/8” deep, which allowsenough room for the Responder 5 Feature Bed ControlModule to fit behind the Feature Bed Receptacle in thesame back box.
- Interfaces Feature Bed Side Rail Controls withResponder 5
- Simple, easy plug-on connectors to the Responder 5Feature Bed Control Module
- Provides dedicated Bed Port for Professional Installationof Feature Beds
- Stainless Steel Wallplate
- Dummy Plug for use when Bed is not plugged into theReceptacle
- Mounting: Mounts in a single gang backbox at least 2 1/8"dee